The short answer
The Hale Telescope’s 200-inch mirror began as a cast glass blank in 1934. It still needed years of grinding, polishing, transport, installation and tests. Caltech’s chronology distinguishes first light in December 1947 from a 1948 dedication and the first recorded image in January 1949.
Why a mirror has several opening dates
Cast glass, usable optics and results
The record of one stage cannot stand in for the work required at the next.
| Stage | What was achieved | What still had to happen |
|---|---|---|
| Casting | The glass blank was made. | The reflecting surface had to be shaped, finished and installed. |
| First light | Light was brought through the installed telescope. | The instrument still needed alignment, calibration and a sustained observing programme. |
| First image | A photographic record was exposed. | Routine operation and many scientific instruments followed. |
Chronology
A timeline of the turning points
Second casting succeeds
Corning’s second attempt produces the blank used for the telescope.
Blank reaches Caltech
The optical shop begins work on the surface.
Mirror reaches Palomar and receives first light
The observatory begins testing the installed optical system.
Dedication
The ceremony marks the opening of the observatory and telescope.
Hubble records the first image
A photograph supplies a durable record of early use.
Why casting was only the beginning
The size of the blank was one of the project’s engineering uncertainties. Caltech’s history records an unsuccessful first casting and a second pour in December 1934. A finished glass blank had the mass and shape to be worked, but it did not yet have the optical surface needed to focus a sharp image.
After the blank reached Caltech in 1936, the optical shop removed material and repeatedly tested the shape. The archival image shows grinding resuming in 1945. It documents work on the blank rather than an observation at Palomar.
Why installation and dedication have separate dates
The mirror reached Palomar in November 1947. Caltech dates the telescope’s first light to December 1947 and its dedication to June 1948. A formal opening can therefore fall between tests and later scientific operation.
First light establishes that the telescope has received astronomical light. It does not tell you whether a particular detector produced a permanent image or whether the instrument had completed commissioning.
What the January 1949 image records
Caltech records Edwin Hubble exposing the first image on 26 January 1949. The photo records an actual use of the optical system and belongs to a different milestone from the first-light test. The chronology also dates the telescope’s operational status later in 1949.
Distinguishing a blank, a test, a ceremony and an image explains why each date appears in accounts of the same telescope.
Continue the chronology
Related history guides
Connected biographies
People connected to this history
Quick answers
Common questions
- When did the Hale Telescope first see light?
- Caltech dates first light to December 1947 and the first image to 26 January 1949.
- Why did a 1934 mirror casting take years to reach Palomar?
- The cast glass needed optical grinding and polishing, followed by transport, installation and tests.
Primary and institutional sources
How this history was checked
Dates, legal milestones and historical claims are checked against the official and institutional records below. This article was reviewed on 19 November 2026.
